UL62368, EN62368, IEC62368, IEC60950, IEC61558, and IEC60335
35A max. at 100-240Vac input for a cold start at 25 degree
higher than 90% at 100-240Vac input and output full load
No-Load Input Power
Input 115Vac or 230Vac,output no load, the input power loss is less than 0.5W
The battery charger shall be hiccup when any output operating in overload condition(set@ Max load 100~180% ) under any line condition for an indefinite period of time. The battery charger shall be self - recovery when the fault condition is removed.
The battery charger shall be hiccup and no damage shall occur when any output operating in a short circuit condition under any line condition for an indefinite period of time. The battery charger shall be self recovery when the fault condition is removed.
-20~40 degree/-30~70 degree
Vibration and Shock
The battery charger shall be designed to withstand normal transportation vibration per MIL-STD-810D,method 514 and procedures X, as it s mounted in the chassis assembly and packed for shipping.
X-Y-Z direction 100cm,one time with each direction
RELIABILITY AND QUALITY CONTROL
BURN-IN: The battery charger shall undergo a minimum of 4 hours Burn-In test under full load at 40 degree~±5.
Semiconductor junction temperatures shall not exceed the manufacturer's maximum thermal rating
The leakage current shall be less than 0.25mA for class II product;When battery charger is operated maximum input voltage and maximum load.